Off Road Trailers
We have three Off Road Trailers-Standard, Deluxe and Extreme.
The specifications are outlined below.
We are now using Zinncanneal sheeting for all trailer trailer sections previouslty made from flat steel.
You can also refer to our Options page for additions for the trailers.
| Standard Off Road | Available-7x4-7x5 and 8x5 |
| GVM | 750kgs |
| HEIGHT | 21” ribbed sides -ZINNCANNEAL SHEETING |
| FLOOR | 2.1mm Checkerplate |
| CHASSIS | 50x50 Full RHS |
| TIE RAILS | All four sides unless toolbox fitted |
| GUARDS | 2.1mm checkerplate |
| AXLE | 40mm square axle – rated 1 tonne |
| SPRINGS | Eye to Eye 4 leaf springs 8mm thick |
| DRAWBAR | 1500mm 75x50mm |
| WHEELS | pre-loved Land cruiser |
| GUSSETS | Checkerplate front and rear |
| TRAILER PLUG | 7 pin flat plug |
| BRAKES | optional |
| LIGHTS | Standard combination |
| COUPLING | 50mm standard ball |
| PROPS | 2 x Alko swing down legs |
| GAS BOTTLE HOLDER | 1 x 4.5kg holder |
| JERRY CAN HOLDER | 1 x Jerry can holder |
| TAILGATE | Swing hinged on left hand side compression lock |
| SPARE WHEEL | Pre-loved with upright mount |
| JOCKEY WHEEL | 6” Swing away welded on |
| Deluxe Off Road | Available-7x4-7x5 and 8x5 |
| GVM | 750kgs |
| HEIGHT | 21” ribbed sides |
| FLOOR | 2.1mm Checkerplate |
| CHASSIS | 50x50 Full RHS |
| TIE RAILS | All four sides unless toolbox fitted |
| GUARDS | 2.1mm checkerplate |
| AXLE | 45mm square axle |
| SPRINGS | Outback rebound springs 7 leaf |
| DRAWBAR | 1500mm 100x50mm |
| WHEELS | New sunraysia rims and tyres |
| GUSSETS | Checkerplate front and rear |
| TRAILER PLUG | 7 pin flat plug |
| BRAKES | optional |
| LIGHTS | LED including number plate light |
| COUPLING | Tregg fitting (includes car attachment) |
| PROPS | 2 x Alko swing down legs |
| GAS BOTTLE HOLDER | 2 x 4.5kg holder |
| JERRY CAN HOLDER | 2 x Jerry can holders |
| TAILGATE | Swing hinged on left hand side |
| SPARE WHEEL | New sunraysia rim and tyre with upright mount |
| JOCKEY WHEEL | 8” Swing away welded on |
| Extreme Off Road | Available-7x4-7x5 and 8x5 |
| GVM | 1600kgs |
| HEIGHT | 550m flush sides |
| FLOOR | 2.1 mm Checkerplate |
| CHASSIS | 75x50 Full RHS |
| TIE RAILS | N/A |
| GUARDS | Internal |
| AXLE | 50mm solid square axle |
| SPRINGS | Cruise Master independent coil suspension |
| DRAWBAR | 1800mm 100x50mm |
| WHEELS | New sunraysia rims and tyres |
| GUSSETS | Enclosed within side compartment |
| TRAILER PLUG | 7 pin flat |
| BRAKES | 10” Electric SPECIAL OFF ROAD MAGNET |
| LIGHTS | Large LED including number plate light |
| COUPLING | Tregg fitting (includes car attachment) |
| STABILISER LEGS | 4 x Alko swing down legs |
| GAS BOTTLE HOLDER | 2 x 9kg holders |
| JERRY CAN HOLDER | Jerry can holder across front of trailer suitable for 4 |
| TAILGATE | Swing hinged on left hand side WITH GREASABLE HINGES |
| SPARE WHEEL MOUNT | Separate spare wheel mount on tailgate |
| SPARE WHEEL | New sunraysia rim and tyre with upright mount |
| JOCKEY WHEEL | 8” Swing away welded on |
| TOOLBOX | Tapered toolbox custom built |
| SIDE STORAGE | 6 storage compartments 3 per side all with key like compression locks |
| TRAILER FINISH | Etched primed and 2-Pac paint |
| STONEGUARD | Made from black heavy duty PVC |
| RECOVERY POINTS | 2 x points at rear of trailer |
| WATER TANK | 65L Camel with lockable filler and Trojan tap |