Southern Cross Trailers - Camper Trailers  

• Roof And Walls 
  Top quality 13 oz (370g/sqm) Rip stop Close weave weather resistant canvas. 

• Ripstop Canvas Roof and Walls
  The canvas incorporates interwoven “rip stop” reinforcement threads in a “crosshatch pattern”, so the material resists ripping or tearing. Other rip stop products such as a nylon rip stop are used in the manufacture of hot air balloons, yacht sails and spinnakers, parachutes, and even Nomex protective clothing for riot police. Authentic rip stop canvas was traditionally always too expensive to incorporate into camper trailer tents and was primarily used in military tents throughout the world. Advances in technology and increased manufacture abilities, has now led to a more competitively priced product.

• Size 
  17ft x 15ft, 25sq meters of space.
  Sleeps 8 persons or even more if utilising the annex.

• Mattress
  King Size Bed 100mm (extra thick) high density foam for a good nights sleep, with zip off cover for washing.
  

• Bed Base Board 
  18mm 12 layered  ply board with two inspection hatches. 

• Colour
  Dark Green walls with beige roof. Dark green walls do not show grass stains or dirt marks. Whereas light coloured walls look very dirty very quickly, particularly if small children around. Beige roof reflects the heat, but allows light in.

• Windows 
  Strengthened M3 Midge mesh, (not mosquito mesh) with clear PVC to expose windows in main tent. 
  Utilising midge mesh keeps out all smaller insects such as sand flies and midges.
  Window coverings can be rolled up half way and secured with toggle tie backs over clear PVC windows to allow in light in adverse conditions.
  Window Covers (canvas) can all be rolled up and held in place with Toggles, and placed under sewn in valance.
  The valance also deflects rain away from windows.

• Doors 
  All zipped canvas, (2 zips per door), with a zipped midge mesh door behind them.
  Doors can be zipped from bottom to top which can stop small children from going inside or outside. 
  Canvas door can be left open without concern for insects getting into the tent, and allows airflow. 
  A second door is in the lastest model that is opposite the front door.

• Ladder
  Aluminium strengthened high quality ladder which slot under bed and secured by canvas straps. The ladder does not get in the way whilst sleeping, and are much safer than heavy steel if they happen to fall to the floor, particularly if small children are around.
  Supplied with zipped canvas bag. 

• Tent Poles (exterior)  
  Heavy Duty 25mm hot galvanised
  Poles are hot galvanised instead of the standard cold galvanised for additional strength and protection from the elements and to avoid rusting.
  All supplied in a canvas bag.

• Tent Poles (internal)
  Heavy duty 25mm hot galvanised spring loaded pivot poles, lock tight adjustable.
  As above plus spring loaded pivot poles to assist in quick set up of tent .
  Spreader Bars are Heavy Duty 25mm hot galvanised
  Spreader bars used for additional support and tensioning of annex roof and tent particularly in very heavy storms or winds if unavoidable.

• Guy Ropes, Pegs and Rain Caps
  A total of 56 pegs, 26 guy ropes, and 6 rain caps (slide over tops of front exterior annex poles to stop rain coming through eyelets, and also protects canvas when guy ropes attached). Many extra supplied in case of loss or damage.

• Annex Floor
  Removable strong PVC with Velcro sewn in to attach to annex walls and tent. Easily cleaned, and very durable. Velcro can be attached to tent and annex walls to fully enclose the tent, (keeps out insects etc).
  
  
• Annex Walls (canvas)
  Three piece (zipped), including windows and entrance door, and attaches to annex roof and floor with very strong Velcro.
  You can have either 1, 2, or 3,sections (walls) in place. Can act as wind break, sunshield , or privacy screen with just one side wall in place, but allows plenty of air flow if hot.
  All canvas is 13oz rip stop.
  

• Annex Walls (midge mesh) 
  Complete with 3 zips, Velcro to attach to annex roof and annex floor. 
  Perfect when increased airflow is needed such as hot summer days or when flying little biters around. 
  Sells separately for $499 but is included in our package
  

• PVC Vents 
  Uniquely designed double vents below main bed area with zipped midge mesh behind them.When unzipped allows airflow into main tent, essential in hot weather. Both PVC and midge mesh can be unzipped to also allow access to water containers, Jerry Cans, etc, on the tent side of the trailer.
  

• Unique exterior Travel Cover .
  500g/sqm  heavy duty PVC, including zips and Velcro.  
  The bottom 15cms can be unzipped and run through aluminium sail track/annex rail (screwed to the bed base board) then zipped back up to form a total dust and water seal giving the tent total protection from the elements.
  The cover is also manufactured oversize to allow for the safe and sealed storage of clothes, sleeping bags etc underneath it. All too often tents are ruined by water and dust getting up underneath the cover, and the tent is left to rot in storage till the next camping adventure. We believe this is one of the most crucial points to ensure longevity of a camper tent.
  The cover also includes 6 tie down straps, with sewn in strengthened buckles.

• Additional Features/Benefits
  

  • Additional Canvas sewn into stress joints.
  • Additional strength and waterproofing ability.
  • Internal Floors are washable, durable PVC (500q/sqm) sewn in, rising 15cms up the inside of walls to keep the bottom of tent walls dry   when raining or ground wet.
  • All window coverings can be turned into additional awnings.
  • Eyelets to all window coverings with a bonus 6 poles, guy ropes and pegs provided. 
  • Privacy Screen (canvas) to main bed. Can be rolled up or zipped closed depending whether privacy required. 
  • Laminated instructions (won’t blow away) including diagrams, and photographs for easy set up.
  • A 15cm zip is sewn into the bottom right hand corner of the main tent for leads etc.
  • Sewn in storage pockets throughout.
  • The main bed has a removable zipped privacy door.
  • A detachable canvas section is provided for covering the trailer tailgate.
  • Steel rings sewn in for pegging down of tent.
  • The tent stands alone, however as mentioned there are pegs and guy ropes in their own canvas bag supplied for adverse conditions.
  • Spare parts/repair kit provided.
  • Can be set up by two people in around 15 minutes- Main section only

On Road Trailer Specs:

ALL Southern Cross Trailers are fully primed and heavily coated in a hammertone finish

Galvanising is an optional extra @ $950

EMAIL FOR BROCHURE   info@southern-cross-trailers.com.au

 Off Road Trailer Specs:

Standard Off Road	Available-7x4-7x5 and 8x5
GVM	750kgs
HEIGHT	21” ribbed sides
FLOOR	2.1mm checkerplate
GUSSETS	Checkerplate front and rear
SPRINGS	Eye to Eye 5 leaf springs 8mm thick-rated 1580kg
AXLE	40mm square axle
CHASSIS	50x50 RHS Full Chassis
WHEELS	16” pre-loved Land cruiser
GUARDS	2.1mm Checkerplate
LIGHTS	Standard combination
TIE RAILS	All four sides unless toolbox fitted
DRAWBAR	1500mm 100x50mm
COUPLING	50mm standardard ball
PROPS	2 x Alko swing down legs (inc handle)
GAS BOTTLE HOLDER	1 x 4.5kg holder
JERRY CAN HOLDER	1 x Jerry can holders
TAILGATE	Swing hinged on left hand side
CHASSIS	50x50 Full RHS
SPARE WHEEL	Pre-loved  with upright mount
JOCKEY WHEEL	Swing away welded on

Deluxe Off Road
GVM	750kgs
HEIGHT	21” ribbed sides
FLOOR	2.1mm checkerplate
GUSSETS	Checkerplate front and rear
SPRINGS	Outback rebound springs 7 leaf
AXLE	45mm square axle
CHASSIS	50x50 RHS Full Chassis
WHEELS	New sunraysia rims and tyres
GUARDS	1.6mm Flat with aluminium trim
LIGHTS	LED including number plate light
TIE RAILS	All four sides unless toolbox fitted
DRAWBAR	1500mm 100x50mm
COUPLING	Tregg fitting (includes car attachment)
PROPS	2 x Alko swing down legs
GAS BOTTLE HOLDER	2 x 4.5kg holder
JERRY CAN HOLDER	2 x Jerry can holders
TAILGATE	Swing hinged on left hand side
CHASSIS	50x50 Full RHS
SPARE WHEEL	New sunraysia rim and tyre with upright mount
JOCKEY WHEEL	Swing away welded on